Operation, Driving procedure – Polaris 2014 Ranger 800 EFI User Manual
Page 39

37
OPERATION
Driving Procedure
1. Wear a helmet, eye protection,
gloves, long-sleeve shirt, long
pants and over-the-ankle boots.
2. Perform the pre-ride
inspection. See page 35.
3. Sit in the driver's seat and
fasten the seat belt.
4. Always use the cab nets (or
doors) while riding in this
vehicle.
5. Start the engine and allow it to
warm up.
6. Apply the service brakes and
shift the transmission into gear.
7. Check your surroundings and determine your path of travel.
8. Release the park brake.
9. Keeping both hands on the steering wheel, slowly release the brakes and depress the
throttle with your right foot to begin driving.
10. Drive slowly. Practice maneuvering and using the throttle and brakes on level surfaces.
11. Do not carry a passenger until you have at least two hours of driving experience with this
vehicle.
- 2014 Ranger 800 EPS 2014 Ranger Crew 800 EFI 2014 Ranger 6x6 2016 Ranger 6x6 2015 Ranger 800 EFI 2015 Ranger 800 EPS 2015 Ranger 6X6 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2011 Ranger Diesel 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2011 Ranger 400 2010 Ranger 400 HO 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2013 Ranger Diesel 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger XP 900