Polaris 2009 Victory Vegas Jackpot - Manual (Page 93)

88
MAINTENANCE
Drive Belt
Drive Belt Tension
1. Place the transmission in neutral and lift the rear wheel off the ground with an appropriate motorcycle lift or a
block of wood or steel placed securely under the frame.
Care should be taken to be sure the motorcycle will not tip or fall while elevated. Severe personal injury
or death may occur if the motorcycle tips or falls.
WARNING
2. Position the small O-ring on the belt tension gauge directly over
the 10 lbs. mark on the plunger as shown.
3. Place a tape measure or rule next to the drive belt as shown.
1. Drive Belt
2. Belt Tension Gauge
1
2
3
3. Rule