Polaris 2009 Victory Vegas Jackpot - Manual (Page 122)

117
MAINTENANCE
Brakes
Brake Pads
Inspect front (1) and rear (2) brake pad thickness. Replace brake
pads when wear lines (3) are no longer visible, or when pad
thickness reaches 1.5 mm.
The shielded pad must be installed on the non-piston side of the
caliper. If the brake pads require replacement, see the VICTORY
Service Manual or an authorized VICTORY dealer for
assistance.
Brake Disc
Visually inspect the brake disc for nicks, scratches, cracks, or
other damage. Inspect the thickness of each brake disc in at least
four points around the disc. Minimum thickness is stamped on
the inner hub of the disc. If the front or rear disc has worn to the
minimum thickness at the thinnest point, or if the disc is
damaged, contact your VICTORY dealer for replacement.
Brake Hoses and Connections
Inspect all brake hoses and connections for dampness or stains
from leaking or dried fluid. Tighten any leaking connections and
replace components as necessary. Refer to the Victory Service
Manual for torque values of fasteners or contact your Victory
dealer.
2
1
3
Replace pads if worn to
less than 1.5 mm
Disc Measuring Points