Polaris 2009 Victory Vegas Jackpot - Manual (Page 131)

126
MAINTENANCE
Seat Installation
1. To reinstall the seat, slide the tongue of the seat into
the rubber mount at rear of fuel tank. Push down on
the rear of the seat until the screw holes align.
2. Ensure the front seat mount is engaged in the front
rubber mount, then install the screws and tighten
securely.
3. Reinstall the fuse box (if removed).
4. Reinstall the left and right side covers.
Always make sure the seats are securely fastened before riding the motorcycle. A loose seat could cause a
sudden shift in riding position, causing loss of control.
WARNING