Maintenance, Fuel system – Polaris 2009 Victory Vegas Jackpot User Manual
Page 107
102
MAINTENANCE
Fuel System
4. With the engine and exhaust cool, wrap a clean shop towel around the fuel line fitting (2) at the fuel rail.
Disconnect it from the fuel rail by squeezing both release buttons (3) simultaneously. Gently slide the fitting
from the fuel rail.
Notice
Fuel can damage painted surfaces and plastic parts. Wipe up spilled fuel immediately using a clean, dry, soft
cloth.
5. Lift the fuel tank and unplug the fuel pump wire harness at the rear of
the tank. At the rear left side of the tank, disconnect the tank vent
hose (California models) and the water drain hose.
6. Carefully remove the fuel tank. Be prepared to catch dripping fuel in
an appropriate container.
7. To reinstall the fuel tank, reverse the removal steps, routing fuel
supply hose to the right of breather hose.
8. Reinstall the fuel line fitting to the fuel rail by sliding the
quick-connect onto the rail connector until you hear it click.
9. Reinstall the fuel tank mounting screws.
Torque: 35 ft-lb. (47.5 Nm)
10. Reinstall the fuel line access cover. Reinstall the seat.
Replace Fuel Filter
The fuel filters are attached to the electric fuel pump located inside the fuel tank. Fuel filter condition is associated
with engine performance and fuel economy. For fuel filter replacement procedures and special tools required, see
the VICTORY Service Manual or contact an authorized VICTORY dealer.
2
3