Polaris 2009 Victory Vegas Jackpot - Manual (Page 123)

118
MAINTENANCE
Gear Shift Pedal
Adjust Gear Shift Pedal Height
1. Loosen the gear shift linkage rod lock nuts.
2. Turn the linkage rod in or out as necessary.
3. Tighten the linkage rod lock nuts.
4. Check the gear shift pedal height.
Notice Do not remove and reposition the shift arm on the shift shaft to adjust gear shift pedal height. A 90_ ¦ 5_
angle between the shift arm and the linkage rod must be maintained to ensure correct shift linkage operation.
2 1 1
90°
1. Shift Linkage Rod Lock Nut
2. Shift Linkage Rod