Polaris 2009 Victory Vegas Jackpot - Manual (Page 91)

86
MAINTENANCE
Drive Belt
Drive Belt Condition
Replace the drive belt if it is cracked or has broken teeth or frayed edges. No matter its condition, the drive belt
should be replaced at periodic intervals (see the VICTORY Service Manual or an authorized VICTORY dealer). DO
NOT attempt to check belt tension if the belt has been exposed to rain or washing within a 24 hour period or if the
belt is hot from riding. Allow the belt to cool down to ambient temperature before measuring belt tension. To obtain
the maximum drive belt service life possible, Victory recommends the replacement of both sprockets as a set if the
drive belt system has over 5,000 miles (8,000 km) of service at the time of damage or failure.
Drive Belt Tension
This procedure involves using the belt tension gauge, part no. PV-43532,
which is designed specifically for measuring drive belt tension.
Before beginning this procedure:
S
Make sure the drive system is dry and at room temperature.
S
Make sure the rear suspension is properly adjusted (see Adjust Rear Shock
Absorber, page 94).
1. Belt Tension
Gauge
2. Small O-Ring
3. Base
4. Plunger
1
2
3
4