Polaris 2009 Victory Vegas Jackpot - Manual (Page 47)

42
INSTRUMENTS, FEATURES AND CONTROLS
Right Handlebar Controls
Engine Stop/Run Switch
The engine stop/run switch completes or interrupts the ignition,
starter, and fuel pump circuits. To complete the circuits, allowing
the engine to start and run, press the lower portion of the engine
stop/run switch (RUN position). To interrupt the circuits, press the
upper portion of the switch (STOP position). The engine should
not start or run when the switch is in the STOP position.
Use the engine stop/run switch to turn the engine off under either
normal or emergency conditions.
Starter Button
The starter button works only when the engine stop/run switch is in the
RUN position and the transmission is in neutral or the clutch is
disengaged (lever pulled in toward handlebar.) To engage the engine
starter motor, press the right side of the starter button.
For complete engine starting procedures, see Starting the Engine, page
65.
1
1. Engine Stop/Run Switch
2. Starter Button
2