Polaris 2001 Victory Standard Cruiser - Manual (Page 75)

68
MAINTENANCE
Ride Height Adjustment - SportCruisert Only
NOTE: If you are not familiar with safe service and adjustment pro-
cedures, have this adjustment performed by an authorized Victory
dealer.
A - Production Clevis Setting
B - Alternate Clevis Setting
To raise the ride height, use the following procedure
(SportCruisert shown).
1. With the motorcycle in an
upright position, secure the
front wheel.
2. Remove seat (see page 28).
3. Using care to properly
support the frame, place a
floor jack beneath the engine
and elevate the rear of the
motorcycle slightly (1/2″-1″) .
This will remove tension from
the front shock mounting
bolt. Remove nut and bolt.
4. Continue raising the rear of the bike until mounting position is
aligned with upper clevis mounting position. Reinstall the bolt
and nut. Torque to 45 ft. lbs. (62 N-m).
5. Lower the motorcycle and reinstall seat.
B
A