Polaris 2001 Victory Standard Cruiser - Manual (Page 61)

54
MAINTENANCE
Fluid Level Inspection
Refer to page 18 for location of rear brake reservoir (2). Observe
the following precautions:
D
When checking the level of
the brake fluids, make sure
the master cylinder is level.
It may be necessary to
move the handlebars or
stand the motorcycle upright.
D
Use only DOT 4. Other-
wise, leakage or poor brake
performance may result.
D
Refill with the same type
brake fluid. Mixing different
types of fluids may result in
detrimental chemical reac-
tions and lead to loss of
braking performance.
D
Do not let water enter the
master cylinder when refil-
ling. Water will significantly
lower the boiling point of the
fluid and may result in poor
braking.
D
Brake fluid attacks many painted surfaces and plastic parts. Al-
ways clean up spilled fluid immediately with large quantities of
water and mild detergent.
D
A lowering of the brake fluid level is normal as the brake pads
wear. If you notice a constant or sudden lowering of the brake
fluid level, have your Victory dealer inspect your machine for the
cause of the problem.
Low brake fluid levels may let air enter the brake system, pos-
sibly creating poor or non-existent braking. Before riding,
check brake fluid level and add if necessary.
Minimum
Level
MIN
MAX
2