Polaris 2001 Victory Standard Cruiser - Manual (Page 58)

51
MAINTENANCE
Start the engine and warm it up for several minutes. While warm-
ing up, check for oil leaks. If any leaks are found, stop the engine
immediately and determine the source of the problem before start-
ing the engine again. Consult your Victory dealer if you cannot de-
termine or repair the source of the problem.
After the engine is started, the oil indicator light should go off.
NOTE: If the indicator light flickers or remains on, immediately stop
the engine and take your motorcycle to a Victory dealer.
TIGHTENING TORQUE
Drain Plug 25 ft. lbs. (3.5 kg-m)
Oil Filter 1 full turn after O-ring contacts
the sealing surface
OIL QUANTITY
Oil and Filter Change 6 quarts (6.7 liters)
Do not put any chemical additives in the oil. Victory’s motor-
cycle oil has been specially designed for this application and
any additional additives are not necessary and have not been
tested by Victory.