Polaris 2001 Victory Standard Cruiser - Manual (Page 48)

41
OPERATION
Engine Break-in
There no more important time in the life of your motorcycle than the
period between zero and 500 miles (830 km). Because the engine
is brand new, you must not put an excessive load on it for the first
500 miles (830 km). The various parts in the engine wear and pol-
ish themselves to the correct operating clearances.
During engine break-in, avoid prolonged full throttle operation, or
any condition which might result in excessive heating of the en-
gine. Read the following information and follow each step in the
break-in of your vehicle.
GUIDELINES FOR ENGINE BREAK-IN
Miles Throttle
Position
Notes
0-90
miles
0-1/3
throttle
position
Avoid prolonged operation above 1/3
throttle. Vary the speed of the motor-
cycle. Do not operate the machine at
one set throttle position.
90-300
miles
0-1/2
throttle
position
Avoid prolonged operation above 1/2
throttle. Follow the other guidelines in
the step above.
300-500
miles
0-3/4
throttle
position
Avoid cruising speeds above 3/4 throttle.
500
miles
Replace the engine oil and engine oil filter. See
pages 50 and 51 for more information. Have the
500 mile service performed.
500
miles
and be-
yond
Avoid prolonged full-throttle operation. Vary the en-
gine speed occasionally. Follow the pre-ride in-
spection (pg 30) and the periodic maintenance
chart on pages 46 and 47.
NOTE: If any operating trouble should occur during the break-in
period, consult a Victory dealer immediately.