Polaris 2001 Victory Standard Cruiser - Manual (Page 31)

24
CONTROL PARTS AND FUNCTIONS
Indicator Lights
1. Turn Indica-
tor Light -
flashes when
the turn switch
is moved to the
left or right.
NOTE: A failed
turn signal bulb
will cause the
turn signal indi-
cator to flash at
a high rate of
speed (i.e.
greater than
twice the normal
frequency). If this is observed by the operator, he/she should
immediately inspect the function of the turn signals and correct
any possible problems.
2. Neutral indicator light “N” - comes on when the transmission
is in neutral.
3. High beam Indicator light - comes on when the headlight high
beam is used.
4. Low oil pressure indicator light - comes on if the oil pressure
is low.
5. Fuel level indicator light - comes on when the fuel level is low.
6. Tachometer - indicates engine rpm
7. Speedometer - indicates vehicle speed in mph or kph
1
2
3
4
5
1
6
7
Always fix faulty turn signal bulbs immediately. Failure to do so
could result in an accident causing serious injury or death.