Epson 710/700/500 - Manual (Page 35)

Connecting to a Computer
■ ■ ■ ■ ■ ■
17
Connecting to a PowerBook
Your PowerBook must have video-out capability in order to
connect to the projector.
To connect the projector to your PowerBook, you need to:
• Connect the computer cable
• Connect the mouse cable (if you want to use the remote
control as a mouse)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note: PowerBook configurations vary, so the location of your
computer’s ports may not match the illustrations. See your
PowerBook manual for the port locations if necessary.
Connecting the Computer Cable
First connect the computer cable. Refer to this illustration as
you follow the steps below.
Macintosh desktop
adapter
Computer port
computer cable
video-out cable