Epson 710/700/500 - Manual (Page 21)

Unpacking the Projector
■ ■ ■ ■ ■ ■
3
Additional Components
Depending on how you plan to use the projector, you may
need these additional components:
• To receive an S-Video signal, you need an S-Video cable.
(One is usually provided with your video device.) A
separate cable is required for each video source.
• To connect the projector to a Macintosh PowerBook, you
need a video-out cable.
(One is provided by/or can be purchased from Apple for all
new PowerBooks that have video-out capability.) If your
PowerBook does not include one, see your Macintosh
dealer.
• To connect the mouse cable to your computer, you may
require a special connector, cable, or other components.
You can obtain these items from your computer dealer. If
your computer doesn’t have a mouse connector, you
cannot use the mouse cable.
♦
Note: You can connect a Kensington MicroSaver® anti-theft
device in the hole on the projector’s right side. Contact your
computer dealer.