Epson 710/700/500 - Manual (Page 28)

■ ■ ■ ■
10
Connecting to a PC Laptop Computer
To connect the projector to your PC laptop computer, you
need to:
• Connect the computer cable
• Connect the mouse cable (if you want to use the remote
control as a mouse)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note: Laptop configurations vary. See your computer manual
for the location of the ports needed to connect your projector.
Connecting the Computer Cable
First connect the projector’s computer cable to your laptop.
1. Connect one end of the computer cable to the projector’s
Computer port.
2. Connect the other end of the video cable to the laptop’s
video (monitor) port.
3. Tighten the screws on all connectors.
Computer port
computer cable