Completing the quick start procedure, Completing the quick start procedure -20 – Grass Valley XG Vertigo Quick Start v.5.0 User Manual
Page 45
2-20
Vertigo XG Installation & Quick Start Guide
Installation and quick start instructions
Completing the quick start procedure
With the Vertigo XG now capable of playing out graphics, we recommend that you disable the
Live Windows as they put an unnecessary burden on the system’s resources during on-air
playout.
Since the mouse, keyboard and DVI monitor are only used during the setup and configuration
procedures, you can also disconnect these peripherals from the Vertigo XG unit.
To disable the Live Window:
1.
If Channel A’s Dashboard is not already open, select the T
OOLS
>L
AUNCH
D
ASHBOARD
menu command in the Vertigo XG’s Control Panel for Channel A. Then, select the device’s
channel from the Device List.
2.
Select A
DVANCED
from the Settings Mode drop-down list.
3.
When promted, click Y
ES
to switch to advance mode.
4.
Select the L
IVE
W
INDOW
tab and clear (disable) the E
NABLED
box.
5.
Click the A
PPLY
C
HANGES
button. When prompted, click Y
ES
to apply the changes.
6.
When prompted, click Y
ES
to perform a restart of the Vertigo XG device.
7.
On dual channel Vertigo XG devices, repeat these steps for Output Channel B.