Grass Valley XG Vertigo Quick Start v.5.0 - Manual (Page 23)

1-4 Vertigo XG Installation & Quick Start Guide
Introduction
Overview of the Vertigo XG chassis
The Vertigo XG unit is a 3RU rackmount rendering platform that incorporates redundant fans,
two power supplies, and 1 TB RAID1-enabled storage (optional 2 TB RAID10 expansion).
The only visible difference between the two models of the Vertigo XG is that the single channel
model (XG21-e) has only one (1) discrete AES audio connector, while the dual channel model
(XG22-e) has two (2) discrete AES audio connectors.
In some cases, the positioning of the connectors on the Vertigo XG’s rear panel differs
depending upon the hardware options installed. See
page 1-3 for a list of the Vertigo XG’s
hardware options.
The following table summarizes the Vertigo XG’s physical dimensions and power
consumption:
Consult the following sections to familiarize yourself with the Vertigo XG’s front and rear panel
components:
•
“Front panel components” on page 1-5
• “Rear panel components” on page 1-6
Chassis F ORM : 3U rackmount chassis
H EIGHT : 5.2” (132 mm)
W IDTH : 17.7” (450 mm)
D EPTH : 25.5” (648 mm)
Power consumption AC input: 100 - 240V, 50 - 60 Hz
Consumption: 4.05 - 1.73A
Power: 410 max.
Temperature Ambient temperature: 35 C
Note: This shall be the maximum internal
temperature within the rack in which the
Vertigo XG unit is installed. °