Grass Valley Profile Enhanced Disk Recorder - Manual (Page 17)

Board Location Guide
Enhanced Disk Recorder Installation 9
Video Router I/O Connections
Now let’s look at the video router connections available in slots J5 – J15. Table 2
(page 10) lists the video router input and output connections. Here’s a description of
what appears in each column:
• The Slot column lists each slot on the motherboard connected to the video router.
• The Board column lists the boards currently installed, as well as the boards you
want to install.
• The Input column identifies data input connections to the slots (boards) from the
video router. The numbers in the blocks correspond to the order in which input
connections are assigned at the video router connector.
• The Output column identifies data output connections from the slots (boards) to
the video router. The numbers in the blocks correspond to the order in which output
connections are assigned at the video router connector.
The shaded blocks in the diagram indicate video router connections shared between
slots. Shared connection are available to either slot, but not both slots at the same time.
Specifically, in Table 2:
• The shaded blocks between slots J5 and J6, slots J7 and J8, slots J10 and J11, and
slots J12 and J13 indicate shared input connections.
• The shaded blocks between slots J8 and J9, slots J10 and J11, and slots J12 and J13
indicate shared output connections.
The next section describes how to select a board location.