Grass Valley Performer-HD - Manual (Page 36)

3-4 Performer-HD Instruction Manual
Section 3 — Operation and Maintenance
2. Press the button of the desired source
The Status Display will now indicate that video is deriving from the se-
lected source (8 in the example) while Audio 1 and Audio 2 continue
from source 5.
Figure 3-7. Video Source 8 Audio Source 5
Audio1 Only
To change the Audio1 source only:
1. Press the Breakaway button labeled A1
The A1 window will display dashed lines awaiting entry. (If you wish
to cancel the breakaway, press the Breakaway button a second time.)
Figure 3-8. Audio1 Source change
2. Press the button of the desired source
The Status Display will now indicate that Audio1 is deriving from the
newly selected source; Video and Audio2 continue as before, for exam-
ple, select A1, source 4.
Figure 3-9. Video Source 8, Audio1 Source 4, Audio2 Source 5
STATUS DISPLAY
V A1 A2
03
V A1 A2
STATUS DISPLAY
04
V A1 A2
STATUS DISPLAY
04