Grass Valley Performer-HD - Manual (Page 35)

Performer-HD Instruction Manual 3-3
Performer-HD Front & Remote Panel Operation
Figure 3-4. Status Display for AFV Take on Source 5
Breakaway
A breakaway take is one in which the source number of at least one level
(Video, Audio1), or Audio2) is different from the source number of one or
both of the other levels. In the following example, we assume a beginning
status in which all levels are deriving from source 5.
Figure 3-5. Breakaway Tale on Source 5
Many users are accustomed to holding down the Breakaway button while
making a breakaway selection. Performer-HD simplifies this operation by
allowing a press and release of the Breakaway button, followed by source
selection.
Video Only
To change the video source only:
1. Press the Breakaway button labeled Video
The V window will display dashed underlines awaiting entry. (to can-
cel the breakaway, press the Breakaway button a second time.)
Figure 3-6. Video Source Change
STATUS DISPLAY
V A1 A2
02
STATUS DISPLAY
V A1 A2
02
STATUS DISPLAY
V A1 A2
02