Grass Valley Soft Panels v.3.1 - Manual (Page 47)

Soft Panels — Instruction Manual 47
Hardware Control Panel Keycap Legend Generation
Keycap Legend Replacement
1. Using your fingers or rubber-mouthed pliers, carefully pull a keycap
out of the Control Panel (
Figure 57 ).
Figure 57. Control Panel Keycap
8053_54
r0
Base
Legend
CAM
1
Keycap
2. If the keycap has an existing legend, remove it from the base or
carefully extract it from the inside of the keycap without scratching it.
3. Insert the new legend into the keycap in the proper orientation.
4. Press the keycap back onto its base in the panel.
5. Repeat the above steps for all the keycaps to be updated with new
legends on that panel.