Grass Valley Soft Panels v.3.1 - Manual (Page 26)

26 Soft Panels — Instruction Manual
Section 4 — Prelude System Soft Panel Configuration
8. With the router configuration loaded (Levels, Sources and Destinations
should be displayed), click on
Send Router Config to Control Panel , make
sure the Soft Panel name is selected on the list, and click OK ( Figure 17 )
Figure 17. Soft Panel Selected for Router Configuration Send.
Note All panels discovered by NetConfig will be selected by default, and it is gen-
erally OK to send the router configuration to all panels. However, they will all
reset if the Reboot when complete box is checked.