Grass Valley Soft Panels v.3.1 - Manual (Page 27)

Soft Panels — Instruction Manual 27
First Time Quick Configuration with Prelude
9. Select the tab of the Soft Panel type you are configuring (XY, for
example), click
Load Panel Config from File , select Default , and click Load
( Figure 18 ).
Figure 18. Default Panel Configuration Selected for Load.
10. With the default panel configuration loaded (Functions and Selections
will be displayed), click
Send Panel Config to Control Panel , and select just
the Soft Panel name.
11. Make sure the Re-Boot when complete box is checked, and then click OK .
12. After reset, the Soft Panel will now have a router and panel
configuration and become operational. Sources can be routed to
Destinations and the buttons will tally (
Figure 19 ).
Figure 19. Operational Default Prelude Soft Panel