Grass Valley EC9535 v.1.1 - Manual (Page 30)

22
Maintenance
Air Flow
When you insert the new battery, be careful to observe the correct polarity.
Air Flow
A fan in the EC9535 frame draws cooling air from the front of the frame, through the door, and
exhausts heated air through the rear. The EC9535 must have the door correctly installed and
closed for proper airflow through the chassis. For maximum air flow, regularly inspect the fan. If
the fan becomes dusty, gently vacuum the fan and grills.
Obtaining Service
For service advice, warranty exchange, warranty repair, or out-of-warranty repair:
• Call Grass Valley Technical Support. (See Grass Valley Technical Support on page 35.) Our Ser-
vice Personnel will help you resolve any service issues.
• If you need an exchange or repair, Grass Valley will assign you a Return Material Authorization
(RMA) number. Do not return equipment without first receiving an RMA number. Grass
Valley uses the RMA to track receipt of the equipment and to record repair or replacement
information.
• For out-of-warranty equipment, the Grass Valley Technical Support Engineer estimates the
cost of repair when you call and requests a purchase order payable to Grass Valley .
• If repair or exchange is required, package the assembly in an antistatic bag and place it in a
shipping box with plenty of padding to prevent damage.
• Address the package using the Shipping Address listed in the front of this manual under
Grass Valley Technical Support on page 35, and ship the equipment to Grass Valley at your com-
pany’s expense.
• When repair or replacement of in-warranty equipment is complete, Grass Valley return ships
the items at our expense. For out-of-warranty equipment Grass Valley charges a shipping
and handling fee. The standard shipping method is second day.
• For out-of-warranty service, Grass Valley will send your company an invoice following the
repair or replacement.
To prevent explosion of the battery and possible equipment damage or harm to
personnel, be sure the battery is oriented with the correct polarity. Polarity
markings are visible on the card’s battery housing.
If airflow is impeded overheating may occur.