Grass Valley NV9648 v.1.1 - Manual (Page 75)

65
NV9648
User’s Guide
Quick source and source buttons are similar, except that the quick source performs a take. Be
aware of which buttons are quick sources so you do not perform an accidental take.
Normally, the button text is the source device’s mnemonic, but the configurer can assign any
text to the button.
Take
In X-Y mode, a take button routes the preset source device(s) on selected levels to the selected
destination device.
In MD mode, a take button switches the preset source device(s) to the selected destination
device(s) on all levels.
The default button text is “Take” but the button can have any legend.
Undefined
An undefined button cannot be used and appears dark (unlit) on the panel. The term “unde-
fined button” has meaning primarily to the configurer and not the operator.
X-Y Display
The ‘X-Y Display’ button displays status in either X-Y mode or MD mode. It also displays other
messages in other circumstances, as required. Pressing this button has no effect.
Prior to a take, the status includes the selected destination and current source. After a take, the
status includes current source and current destination. The ‘X-Y Display’ button turns low-tally
red if that destination is locked (by anyone) or protected (by another user).
If there is no destination selected, this button says so.
The button appears in whatever color the system assigns it — typically amber or dark red.
 Prior to a take, the preset source name is displayed on any selection buttons present on the
panel. After a take, the selection buttons continue to display the source name, which is now
the current source name.
In MD mode, the X-Y Display button shows (1) current source, (2) preset source, and (3) destina-
tion for one of the selected MD devices
— the first one if more than one are selected.
XY/MD Mode
This button switches the panel between X-Y and multi-destination modes.
The button is green for X-Y mode and amber for multi-destination mode.
The button text changes to read “XY-MD In XY Mode” or “XY-MD In MD Mode” according to the
mode you have selected. The alphanumeric display also reflects the current mode.