Grass Valley MOBox Mixed-Operation Systems - Manual (Page 6)

Mixed Operation User’s Guide vi
fiber optic transmission units
Label positions
On the CMO adapter the CLASS 1 LASER PRODUCT label is located above the fiber
optic connector on the rear of the adapter housing. On the BMO box the CLASS 1
LASER PRODUCT label is located at the rear of the case of the box.
Laser safety statement (Europe)
fiber optic transmission units are classified as a "CLASS 1 Laser Product" according to
EN 60825-1, Safety of Laser products. Class 1 laser products are considered safe and
do not result in biological hazard if used according to the instructions.
Laser safety statement (US)
fiber optic transmission units are classified as a "CLASS 1 Laser Product" according to
21CFR 1040.10 of the US Food and Drug Administration (FDA) Center for Devices and
Radiological Health.
WARNING
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
To ensure proper use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance, contact an
authorized service location.
fiber optic cable precautions
fiber optic cables and connectors are easily damaged; take the following percautions
into account:
• Do not bend the cable beyond the minimum permissible bend range specified
for the cable.
• Avoid kinks in the cable.
• Avoid subjecting the cable to a high tension force (even momentarily).
• Do not twist the cable when connecting it to equipment.
• Insert connectors straight and fully into their corresponding sockets.
• In fiber optic cable systems always put the dust caps on cable and panel
connectors immediately after disconnecting a cable. Keep the dust caps clean.
CLASS 1
LASER PRODUCT
LASER KLASSE 1
PRODUKT