Grass Valley MOBox Mixed-Operation Systems - Manual (Page 5)

Mixed Operation User’s Guide v
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• There are no user servicable parts inside. Refer servicing to qualified personnel only
or contact your local Grass Valley representative.
• Observe local building safety, fire protection and electrical installation standards
during installation and operation of this equipment.
• Before connecting the equipment to the power supply of the installation, verify the
proper functioning of the protective earth lead.
• Whenever it is likely that safe operation is impaired, the apparatus must be made
inoperative and secured against any unintended operation.
Cautions
Cautions indicate procedures or practices that should be followed to prevent damage
or destruction to equipment or property.
• To prevent risk of overheating, ventilate the product correctly.
• Connect the product only to a power source with the specified voltage rating.
• Always switch off the camera before changing the power supply.
• Connection panel position in the rack should ensure that the plug and power cord
are within easy reach for switching off purposes.
• Be extremely careful with the connectors between the camera head and the
adapter. Do not allow the guide pins to damage the pins of the connector. Follow
these steps in the order given. Tightening the screws in the wrong order could
result in mechanical damage to the camera. Loosening the screws in the wrong
order could result in mechanical damage to the camera.
• Avoid very damp places. If the environment is wet or damp a rain cover must be
used to protect the unit.
• Do not subject the unit to severe shocks or vibration.
• Do not expose the unit to extremes of temperature.
• Do not leave the unit in direct sunlight or close to heating appliances for extended
periods.