Grass Valley MOBox Mixed-Operation Systems - Manual (Page 13)

Mixed Operation User’s Guide | LDK 4900 CMO adapter 5
2.1.3 Connecting the CMO adapter
Connect the cables between the HD Triax and the CMO adapter:
• DC power cable
• HD-SDI cable
When you are using the camera in EFP mode:
• LDK 4903 Triax cable (0.4 m) from the mini Triax connector of the CMO adapter
to the Triax connector on the camera.
When you are using the camera with a SuperXpander with Triax module:
• LDK 4907 Triax cable (1.2 m) from the mini Triax connector of the CMO adapter
to the Triax connector at the left side of the SuperXpander. Use the cable clamp
at the front right side of the SuperXpander to guide the Triax cable.
Figure 5. Connecting cables between Triax adapter and CMO adapter
☞
Note
When the camera is powered locally by a DC power supply both the camera and the
CMO adapter have to be powered individually. In this case the DC power cable is not
used. Refer to your camera user’s guide for more information about local power.
HD-SDI cable (2)
DC power cable (1)
LDK 4903 Triax cable (3)