Grass Valley KALEIDO-IP X300 v.7.80 User Manual
Page 33
21
Kaleido-IP X300/X100
Quick Start Guide
The settings for the selected multicast stream appear in the Properties pane.
3 Replace the default stream name if desired, select the appropriate protocol (RTP, UDP),
and enter the multicast group IP address and port number associated with the actual
transport stream you wish to monitor.
4 In the case of an SSM (or SFM) stream, enter the IP address associated with the specific
source you wish to monitor in the SSM source IP address box.
5 If the stream you wish to add is constrained to a virtual LAN, enter the appropriate
VLAN identifier.
Note:
Under the network adapter elements, transport streams are listed in
alphabetical order.
Notes
• The Kaleido-X Software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ '
and
"
.
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.