Grass Valley K2 Level 3 RAID Dec.09 2005 - Manual (Page 40)

40 Level 3 RAID Instruction Manual November 23, 2005
Chapter 3 Servicing the Level 3 RAID
.
.
Flash On Off The controller is being booted
Flash Busy
flashing Busy flashing Firmware is being updated automatically
Flash
(synchronized
with Fault
LED) Off Flash
(synchronized
with SVP
LED) Download mode
Busy flashing Flash Off Online downloading is being executed through
maintenance PC.
HL0/1 HA0/1 Meaning
On Off The host Fibre Channel link-up is being executed
Off Off The host FIbre Channel link-down is being
executed
Flash Flash Host Fibre Channel port offline
Flash twice
in 2 sec. Flash twice in
2 sec. Wait for setting for host Fibre Channel port
DL0/1 Meaning
On The Fibre Channel link-up is being executed on the
Expansion chassis
Off The Fibre Channel link-down is being executed on
the Expansion chassis
DISKLINK Meaning
On The Fibre Channel link-up is in progress on the
internal Ezpansion Chassis side
Off The Fibre Channel link-down is in progress on the
internal Ezpansion Chassis side
MC ACD LED
(ACS) Meaning
On SD card is being accessed
SVP
LED DIR
LED FLT LED Meaning