Grass Valley K2 Level 3 RAID Dec.09 2005 - Manual (Page 27)

November 23, 2005 Level 3 RAID Instruction Manual 27
Binding disk modules into groups
Binding disk modules into groups
After cabling a K2 Level 3 and any Level 3 Expansions, you must bind disk modules
into LUNs using the Storage Utility provided by Grass Valley. Refer to the K2
Storage System Instruction Manual for information on using the Storage Utility to
bind drives.
NOTE: Make sure you allow adequate time for binding disk modules into LUNs.
K2 Level 3 RAID controllers bind multiple LUNs at the same time, yet take more
than an hour to bind a LUN. Large drive capacities and multiple LUNs can
increase the binding time to 10 hours or more.