Grass Valley Vertigo XG Integration v.2.3 User Manual
Page 26
2-16
Vertigo XG & iTX Integration User Guide
Configuration Procedures
Configuring the Vertigo XG’s Dashboard settings for automation
There are a few settings in the Vertigo XG’s Dashboard that must be configured to
synchronize the Vertigo XG’s rendering services with the video coming from the iTX Output
Server, as well as to allow iTX automation to control the Vertigo XG.
The following procedure instructs you how to set the Vertigo XG’s Automation settings:
To configure the Vertigo XG’s Automation settings:
1.
Open the Vertigo XG’s Dashboard application by selecting the T
OOLS
>L
AUNCH
D
ASHBOARD
command from the Vertigo XG’s Control Panel, which should already be
open on the Vertigo XG’s desktop.
2.
Select the Vertigo XG device from the Device Discovery table. If the device does not
appear in the table, perform a Device Discovery (T
OOLS
>S
ETTINGS
>D
EVICE
D
ISCOVERY
).
3.
With the S
ETTINGS
M
ODE
still set to S
IMPLE
, ensure that the O
UTPUT
R
ESOLUTION
setting
is the same as the TV F
ORMAT
setting in the Xplay Automation settings (