Grass Valley iTX Emergency Alert Service v.2.3 - Manual (Page 10)

iTX Emergency Alert System User Manual 2-5
Configuration Instructions
4. Click the Locations button, select Enable All Locations and click OK.
5. Click OK in the Encode/Decode Configuration dialog and the device is added.
6. Optional - Some EAS devices, including the EASyCast, can be configured to use
SNMP traps to check the device’s connectivity to the iTX Emergency Alert Service.
Note that an additional license is required to use this functionality.
To configure the EASyCast device receive SNMP heartbeat traps:
a. Select the Management tab and click Add to add the ENDEC Manager Server.
b. Specify the IP Address, Trap Port and select the Enable Heartbeat Trap
Messages option. Click OK.
Ensure that the IP Address and Trap Port are identical to those configured for the iTX
Emergency Alert System (EAS Listener IP Address and EAS Listener Port) as
described on
page 2-11 .
AndrewDev
192.168.173.68
usitx\itx.admin
password
AndrewDev EAC / Evertz 192.168.173.68 4098 All Locations
192.168.173.68 165