Grass Valley Profile InSync v.3.0 - Manual (Page 12)

12 InSync User Guide July 2, 2008
Using InSync
• Periodic — When a synchronization completes, InSync waits for a specified
time period, then automatically triggers another synchronization. Enter the time
period that you want InSync to wait between synchronizations.
• Timed — Synchronizes at specified times. To specify times, click the Set Times
button. The Select Time dialog box opens.
Enter a synchronization start time and click Add . Repeat until all your desired
start times are added, then close the dialog box.
4. To control the behavior of ongoing synchronization, select one of the
Synchronization Directions, as explained in the following tables:
• If Event synchronization mode is selected, settings behave as follows:
• If Manual, Period, or Time synchronization mode is selected, settings behave as
follows:
If you select this
synchronization
direction… InSync does this
to clips deleted
from the slave
only… And this to clips
deleted from the
master only… And does this to
clips modified on
the master only… And this to clips
modified on the
slave only…
One Way Nothing Delete from slave Copy to slave Nothing
BiDirectional
With Initial Delete Delete from
master Delete from slave Copy to slave Copy to master
BiDirectional
With Initial
Duplicate Delete from
master Delete from slave Copy to slave Copy to master
If you select this
synchronization
direction… InSync does this
to clips deleted
from the slave
only… And this to clips
deleted from the
master only… And does this to
clips modified on
the master only… And this to clips
modified on the
slave only…
One Way Copy to slave Nothing Copy to slave Nothing
BiDirectional
With Initial Delete Delete from
master Delete from slave Copy to slave Copy to master