Extreme Networks BlackDiamond 12804 - Manual (Page 86)

Installing Power Supply Units
BlackDiamond 12800 Series Switches Hardware Installation Guide 86
Figure 47: Installing and Routing the AC Power Cords
3 Hold the AC power cord retainer channel in the position shown in Figure 48 .
Figure 48: BlackDiamond 12804 AC Power Cord Retainer
4 Place the retainer channel against the switch as shown in Figure 49 . Tighten the captive screw at each
end of the channel.
EX_138
Starting at the left, insert each plug
and lift power cord over previous plug
EX_141 Captive screw
Captive screw