Mid-mounting a blackdiamond 12802 chassis – Extreme Networks BlackDiamond 12804 User Manual
Page 67
Rack-Mounting the BlackDiamond 12802 Chassis
BlackDiamond 12800 Series Switches Hardware Installation Guide
67
4
Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to
for the screw locations.
Figure 35: Securing the BlackDiamond 12802 Chassis to the Rack (Front-mount Position)
Mid-Mounting a BlackDiamond 12802 Chassis
To mid-mount the BlackDiamond 12802 chassis in a rack:
1
Place each mounting bracket against the switch chassis with the mounting flange at the middle of
the chassis side (
).
Figure 36: Mounting Flanges at the Middle
2
Insert and tighten the provided flat-head screws to secure the brackets to the chassis.
3
Slide the chassis into the equipment rack.
4
Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to
for the screw locations.
BD_151
Bracket
Bracket
Screw
BD_143