Grass Valley K2 Edge Installation v.4.0.2 - Manual (Page 49)

K2 Edge Installation and Service Manual - document version: 4.0.2 – Page 49
Example Yast screen.
 Use [TAB] to navigate through and change applicable settings.
 To change the hostname or name server, select [Hostname and Name Server],
then press [Enter].
 To change the gateway, select [Routing], then press [Enter].
 To save settings, select [Next]. To discard, select [Abort].
 In the initial screen, select [Finish] to activate the settings.
The system can now be accessed with SSH, FTP, Cobalt, etcetera.