Grass Valley K2 Edge Installation v.4.0.2 - Manual (Page 19)

K2 Edge Installation and Service Manual - document version: 4.0.2 – Page 19
10 The IP Manager: introduction
The IP Manager enables remote server management, monitoring and configuration of the K2 Edge.
The IP Manager is accessible via web, or via the LCD-panel on the front of the server. Two menus are
available:
• the K2 Edge-menu: this is the standard menu
• the IP Manager menu: also available when the system is unreachable (note that less options
are available in this menu)
If the system is unreachable, press the knob on the front of the K2 Edge for 3 seconds to switch from
the K2 Edge menu to the IP Manager menu.
Changing settings and executing commands via the IP Manager can interrupt a broadcast.
First configure the IP Manager as described in the next chapters to be able to configure the K2 Edge
via the web interface.
In the IP manager, to save the changes you made, select Set/OK.
Changes in Channel settings have to be activated after being set: select Set/OK, then Activate/The
changed settings to activate changes. Note that when changes are activated, the nexos processes
are restarted which will interrupt playout.
If activation is required, the Activate/The changed settings option is available. When working via the
front panel, you have to scroll to this option.
10.1 The LCD front panel
Use the rotary knob to operate the IP Manager via the front panel:
• Turn the rotary knob backwards and forwards to scroll through options.
• Press the rotary knob to select an item or confirm a selection.
• Selected items are marked by [], <>, an arrow, or are highlighted.
• Press the knob 3 seconds to return to the main menu.
• Or, to discard changes and return to the main menu from a sub menu, rotate the knob to the
• back/cancel/discard option, then press the knob.
K2 Edge with IP Manager LCD-panel and knob.