Grass Valley K2 Edge Engineering Manual v4.1 - Manual (Page 18)

K2 Edge Engineering Manual- document version: 4.1 - Page 18
4.6 GPIO
Example.
Internal GPIO: DB9M
External GPIO: 410E
 GPIO action: specify an action, for example GPI-5 switches to off
Use the pinning table to define conditionals for pins 1-8.

x: don't care (0 or 1)

0: low

1: high
 Timecheat: check to enable cheat
type
 None: results in no action
 Script: runs a Linux shell script upon incoming GPIO commands, delayed by the configured delay
time if applicable.
Argument: script name preceded by the full path
 Template: trigger a Composer template.
Argument: the template name which is configured in the channel pack

DB9M GPIO off: triggers a level on the specified GPIO bit, delayed by the configured delay
time if applicable.
Argument: GPI pin number
 DB9M GPIO on: triggers a level on the specified GPIO bit, delayed by the configured delay time if
applicable.
Argument: GPI pin number
 censor IO off: disables the censor on a SDI output port for the specified SDI port number
Argument: SDI port number (number only)
 censor IO on: censors a SDI output port
Argument: SDI port number (number only)
 Cheat delay: execute actions with an extra offset in hh:mm:ss:ff.
Note that cheat delays are only possible when in input mode.
 Click Delete to delete a rule.