Grass Valley DD10 part 2 - Manual (Page 36)

3.9 Stores menu Diamond digital DD10
208
3.9.6 MASK STORE
Store Source
PATT1 PATT2 KEY1 KEY2 KEY3
The signals used in the mask store are to be taken from the same ME.
To store a mask, proceed as follows:
•
Select the signal to be stored in the mask store with PATT1/PATT2 or
KEY1/KEY2/KEY3 in the menu.
•
In order to assign a key signal as a source to the store, press KEY1 or KEY2.
The required adjustments can subsequently be made in the Keyers panel.
•
To store a wipe signal, press PATT1 or PATT2. The desired wipe pattern and
the modification can then be selected in the Wipe panel.
Mask Store