Grass Valley DD10 part 2 User Manual

Page 20

3.6 Disk / File menu

Diamond digital DD10

192

3.6.13

COPYING USER–SPECIFIC FILES

Different users may copy user-specific files within the switcher as follows:

Prerequisites

For copying a file to another user, the user to receive the file (destination user) must
be logged in. In addition, the user must have access to the file to be copied (for fur-
ther information please refer to the file description in the operating instructions).

Procedure

Select FILE menu.

Move cursor into the directory into which the file is to be copied (target direc-
tory).

Change to the second directory window and position cursor on the file to be
copied (source file)
If you wish to copy the source file of a user different from the indicated user,
the USER softkey permits selecting the file of another user.

Press the COPY softkey. A window with the name of the target file and the
logged–in user will appear.

Press the OK softkey to start the copying procedure.

If the copying cannot be executed, a corresponding message appears in the acti-
vity window.

3.6.14

LOADING BACKUP FILES (AUTO LOAD)

Supplement to the operation instructions, section File Menu.

When creating backup files, directory entries are made on the disk, having the type
designation ALD. When loading the backup data into the mixer, this type informa-
tion is evaluated.
Directories with the type information ALD are reloaded from the floppy disk into
the corresponding device (EBox, panel).
Directories with the type information DIR are skipped when reloading.

Should be prevented that data are reloaded into the devices connected to the net-
work, you can skip the corresponding directory by converting the type information
ALD into DIR.

Conversion of the type information is possible by means of softkey ALD in the File
menu. Insert the disk into the disk drive, move the cursor bar onto the correspon-
ding directory and press softkey ALD. Every time the key is pressed, the type infor-
mation changes from DIR into ALD.
See in the figure (page 1) the files D5-PAN with the type DIR and D30-PAN with
the type ALD.

Softkey ALD appears only when the directory window displays the disk contents.