Grass Valley DD10 part 2 - Manual (Page 2)

3.6 Disk / File menu Diamond digital DD10
174
Press the associated function key to erase the disk in the disk drive. Before the
instruction is executed, a safety confirmation inquiry is made. Use CANCEL to can-
cel the procedure and DELETE to erase the disk.
ALL SETUPS
STORE RECALL
Press the associated function key to STORE or RECALL all files of the switcher
and the associated E-box. In this process two directories are generated on the
floppy disk in which the following data are stored:
ALL-EB contains all files of the E-box
ALL-PA contains all files of the control panel.
This function can be used to create the standard backup disk.
USER DATA
STORE RECALL
Press the associated function key to STORE or RECALL user specific data from
the control panel and the associated E-box. During storing, the following internal
files of the logged-in user are written on the disk:
From the E-box:
TEXTURES
From the control panel:
STATE-PA
STATE-EB
EXTRA
PATT-USR
For further information please refer to Standard files in FILE menu.
Note:
When the user files are recalled, the same system configuration (user, access etc.)
must be given as at the time of storing.
DELETE
DISK