Grass Valley DD10 part 2 - Manual (Page 35)

3.9 Stores menu Diamond digital DD10
207
3.9.3 FREEZE
FREEZE
Press the associated function key to store a picture signal.
Note: Please note that a signal is delayed by one frame when it passes
through the store.
3.9.4 STORING A VIDEO PICTURE (VIDEO STORE)
To store a video picture, proceed as follows:
•
Enable the Video Store key in the Aux Buses panel and select a picture source.
In addition to the input sources you can of course also select the matte signals
or the Previews or Program outputs.
•
The stored picture signal can be recalled as input signal with the keys 2nd and
Video Store in the Source Selection panel.
3.9.5 MATTE STORE
Store Source
PATT1 PATT2 KEY1 KEY2 KEY3
To store a background, proceed as follows:
•
Select the signal to be stored in the Matte store with PATT1/PATT2 or
KEY1/KEY2/KEY3.
•
To store a wipe signal, press PATT1 or PATT2. The desired wipe pattern and
the modification can then be selected in the Wipe panel.
•
For storing a texture, please refer to section WIPE PANEL.
•
To assign a key signal as a source to the store, press KEY1 or KEY2.
The required adjustments can subsequently be made in the Keyers panel.
Video Store
Matte Store