Grass Valley CopperHead PowerWafer - Manual (Page 37)

33
Specifications
Distance Limit *see note below
Tactical Fiber (Local Power at Camera):
“Dry” fiber (1.5Gb/s) ............................................................ 16 db optical loss (≈ 30 km*)
SMPTE 311M Hybrid Fiber...........................................................................................................
Standard Internal Power Supply w/PowerWafer
.............................................................................................. 240m (787 ft): 95W @ 12VDC*
Long Range: HDX w/PowerPlus .............2km (6562 ft.): 100W Cont./150W Peak*
Mechanical/Environmental
Dimensions (WxLxD)
PowerWafer ............................................................................................... 5" x 6.12" x 2.2"
MPS Power Supply .................................................................................. 9.7" x 2.5" x 4.5"
Weight
PowerWafer ..................................................................................................................1.5 lb.
MPS Power Supply ................................................................................................... 3.0 lb.
Power Consumption
Base Station (Hybrid Fiber):
Power Req ................................................................ 110-120/220-240 VAC, 50 to 60Hz
Power Consumption ................................................................ 250 watts max @120VAC
Temperature Range ............................................................................................ -25° to +55°C
Humidity Range ................................................................... 0 to 95% RH, Noncondensing
* The maximum cable length varies due to optical loss that can depend on cable quality,
dirt/dust/contamination on connectors, and the number of cable connectors. When using
hybrid cable for camera power, the size of the hybrid cable, as well as the power draw of the
camera, lens, viewfinder, and other accessories are also factors