Grass Valley CopperHead PowerWafer - Manual (Page 35)

31
CopperHead PowerWafer
User Guide
Connect the MPS Power Supply (E) to AC Mains (F). Connect a length of hybrid fiber cable
(G) between the powered connector (H) on the MPS Power Supply (E) and the swiveled
fiber connector (I) on Camera Unit (J). The hybrid fiber cable can be equipped with either
OpticalCON or SMPTE 304M connectors (K). The camera and Camera Unit will be powered
via the hybrid cable by the PowerWafer (L).
The "dry" fiber connectors (D) on the MPS Power Supply (E) and the "dry" fiber connector(s)
(B) on Base Station (C) can equipped with one of two connector options:
• Two ST connectors (shown)
• OpticalCON connector
The powered fiber connectors (H) on the MPS Power Supply (E) and the fiber connector I on
Camera Unit (J) be equipped with one of two connector options:
• Two ST connectors (shown)
• OpticalCON connector
Other fiber optic connectors are available by special order. Contact Miranda (see Contact
Us on page 35) or your CopperHead dealer for more information.