Grass Valley CopperHead PowerWafer - Manual (Page 30)

26
CopperHead System Components
HDX Status Indicators
HDX Status Indicators
Fig. 3-15: HDX Displays
• 1: AC IN - MAINS
AC Input power is present
• 2: DC HV ENABLE
DC "Sense" voltage from PowerPlus is present
• 3: AC HV ENABLE
AC "Sense" voltage from PowerPlus is present
• 4: HV Present
AC or DC voltage is available on Hybrid connector
• 5: CABLE OPEN
No camera cable connected
• 6: CABLE SHORT
Camera cable non-functional due to short
• 7: REMOTE PWR ENABLE
• Displays red if local/remote sw in remote position and opt power <= -27 dBm
• Displays green if local/remote sw in remote position and opt power >= -24 dBm
gates HV power
• 8: LOAD TYPE
Indicates the type of load or camera being used:
• N/A - No load detected
• PWR+ - PowerPlus detected
• 9: Optical Power
Not used with PowerPlus.
• 10: Local Remote
Not Used With PowerPlus.