Grass Valley CopperHead PowerWafer - Manual (Page 21)

17
CopperHead PowerWafer
User Guide
• RED when Base Station is not "locked" to Camera Unit.
• 2: Return Video/Sync
Indicates the presence of the analog video signal (VBS) at Base Station's "VBS In" BNC.
This VBS can be used for return "program" video or for genlock to the camera.
• 3: SDI Presence
Illuminates GREEN to indicate the presence of digital SDI video from Camera Unit. This
will stay illuminated GREEN as long as there is adequate optical power being received
at Base Station. See Error! Reference source not found. for more information.
• 4: Intercom
Illuminates GREEN to indicate audio activity on the Intercom channel.
• 5: Control
Illuminates GREEN when camera control data is being transmitted between Camera
Unit and Base Station.
Front Panel Section B- Power Switch and Indicator
Fig. 3-4: Base Station Power Switch
• 6: Power
Indicates that power is applied to Base Station.
• GREEN when Base Station is fully powered.
• RED when there is power connected to Base Station, but Base Station is not turned
on.
• 7: Power Switch
Used to turn Base Station on and off. With a hybrid power system (power supplied by
Base Station) this switch will control power to the camera and Camera Unit.