Grass Valley CopperHead PowerWafer User Manual

Page 33

CopperHead PowerWafer

User Guide

SMPTE Hybrid Fiber between Base Station (powered) and Camera Unit

Fig. 4-2: SMPTE Hybrid Fiber between Base Station (powered) and Camera Unit

Connect a length of SMPTE Hybrid fiber cable A between Camera Unit B and the fiber
receptacle C on the back of Base Station D.

At each end of the fiber cable will be either an OpticalCON or SMPTE 304M Hybrid fiber
connector E and F.

The camera will be powered by the CopperHead PowerWafer Camera Power Supply G.

SMPTE Hybrid
Fiber

External MPS Power
Supply 95 Watts1

PowerWafer
Adaptor

5 KM between base and
power supply

240 meters between
power supply and
camera

SMPTE Hybrid
Fiber

External HDX Power
Supply - 150 Watts2

PowerPlus Adaptor

5 KM between base and
power supply

3.2 KM between power
supply and camera

Note: The external MPS power supply must be equipped with the
required fiber cable connectors depending on your system
requirements. See

page 23 for a description of the various options

Cable Type

Base Station Power

Camera Unit Power

Distance Range Between
Camera and Base