Grass Valley Personal Locator System CameraMan - Manual (Page 6)

Page 3 Meet Your Personal Locator Camera System
Locator Keypad Controls
▼
Preset Number Rotary Switches– Used to assign
a distributed Location Preset to each the keypad.
▼ Zoom (IN/OUT)- Used to adjust the
tightness of the camera view.
▼ PAN/TILT- Used to
control the camera’s
up/down, and left/right
movement.
▼
Base Unit Address Rotary Switch– Selects
which CameraMan Camera the keypad will
control.
▼ Image (Bright/Dark)- Used to adjust the
brighteness of the picture.
▼ autoIMAGE- Used to enable the camera to
automatically adjust the image setting to
compensate for varying light levels.
▼ FOCUS (3-CCD Keypads only)- Used to adjust
the focal point of the camera.
Note: 1-CCD cameras are auto-focus, so the
keypads do not have manual focus buttons.
▼
Battery Compartment– Takes two N-Size batteries with
a lifespan of four to six months with average use.
Note: The keypad will indicate that the battery is
low with a three second continuous beep when any
of the buttons are pressed. At that time, the
batteries should be replaced.